基于正态分布曲线的分段式变步长LMS算法

针对传统最小均方误差(Least Mean Square, LMS)自适应滤波算法由于步长固定,在解决稳态误差与收敛性之间的关系时,始终处于矛盾状态的问题,在对传统的固定步长LMS自适应滤波算法分析的基础上,根据变步长LMS自适应滤波算法的步长调整原则,通过构造步长因子与误差信号的非线性函数,提出了一种基于正态分布曲线的分段式变步长LMS自适应滤波算法,并分析了参数取值对算法性能的影响。针对实际信号处理过程中参考信号难以选取的问题,提出了一种基于分裂阵的参考信号选取方法。理论和海试数据分析结果表明:该算法的收敛速度和稳态误差明显优于固定步长的LMS自适应滤波算法和基于Sigmoid函数的变步长LMS自适应滤波算法。     

Fragment spatial distribution of prismatic casing under internal explosive loading

Non-cylindrical casings filled with explosives have undergone rapid development in warhead design and explosion control. The fragment spatial distribution of prismatic casings is more complex than that of traditional cylindrical casings. In this study, numerical and experimental investigations into the fragment spatial distribution of a prismatic casing were conducted. A new numerical method, which adds the Lagrangian marker points to the Eulerian grid, was proposed to track the multi-material interfaces and material dynamic fractures. Physical quantity mappings between the Lagrangian marker points and Eulerian grid were achieved by their topological relationship. Thereafter, the fragment spatial distributions of the prismatic casing with different fragment sizes, fragment shapes, and casing geometries were obtained using the numerical method. Moreover, fragment spatial distribution experiments were conducted on the prismatic casing with different fragment sizes and shapes, and the experimental data were compared with the numerical results. The effects of the fragment and casing geometry on the fragment spatial distributions were determined by analyzing the numerical results and experimental data. Finally, a formula including the casing geometry parameters was fitted to predict the fragment spatial distribution of the prismatic casing under internal explosive loading.     

空间信息支持高能激光武器应用研究*

依据空间信息支持现代作战的主要内容,介绍了五大类空间信息状况,分析了新概念武器高能激光的基本原理,并就其应用过程建立了UML模型。在此基础上,设计了空间信息支持高能激光武器应用系统的框架,并就高能激光武器对空间信息的需求进行了重点分析,而后以信息的转换与传递为主线,探讨了高能激光武器运用空间信息的流程。最后对该领域研究的趋势和发展前景做出了展望,并提出对其未来发展的要求。     

不同分散剂对纳米SiO_2水中分散的影响

选取六偏磷酸钠(SHMP)、十二烷基苯磺酸钠(SDBS)及KCl作分散剂,并采用超声分散方法,制备纳米SiO2悬浮液,对纳米SiO2的水中分散性能进行研究。测试分散体系中纳米SiO2粒子的粒径及分布、Zeta电位及透光率,探讨了不同分散剂对纳米SiO2分散性能的影响。结果表明:不同分散剂对纳米SiO2的粒径都有明显影响,但粒径分布宽度差别较大;同在分散粒径较小的条件下,分别添加3种分散剂的悬浮液体系具有不同的稳定性,其中含SDBS的分散体系因静电和空间位阻的作用而表现出良好的分散稳定性。     

基于水下声场信息的三维航路规划研究

针对目前大规模水下复杂战场环境中的航路规划困难的问题。设计了一种以距离值传递法为基础的航路规划方法,该方法以水下声场为主要威胁源,运用三维抛物方程(PE)模型计算水下声场数据,并以此建立三维水下战场环境。利用限制线性八叉树的方法对数据场进行数据分割,从而达到对搜索空间的压缩,最后通过距离值传递法搜索得到最佳航路。仿真结果表明该方法较快的实现了三维声场环境下的不同起始点、多目标寻径,满足一定条件下航路规划要求。     

Investigation on the spatial distribution characteristics of behind-armor debris formed by the perforation of EFP through steel target

The behind-armor debris (BAD) formed by the perforation of an EFP is the main damage factor for the secondary destruction to the behind-armor components. Aiming at investigating the BAD caused by EFP, flash X-ray radiography combined with an experimental witness plate test method was used, and the FEM-SPH adaptive conversion algorithm in LS-DYNA software was employed to model the perforation process. The simulation results of the debris cloud shape and number of debris were in good agreement with the flash X-ray radiographs and perforated holes on the witness plate, respectively. Three-dimensional numerical simulations of EFP's penetration under various impact conditions were conducted. The results show that, an ellipsoidal debris cloud, with the major-to-minor axis radio (a/b) smaller than that caused by shaped charge jets, was formed behind the target. With the increase of target thickness (h) and decrease of impact velocity (v₀) and obliquity (θ), the value of a/b decreases. The number of debris ejected from target is significantly higher than that from EFP. Based on the statistical analysis of the spatial distribution of the BAD, An engineering calculation model was established considering the influence of h, v₀ and θ. The model can with reasonable accuracy predict the quantity and velocity distribution characteristics of BAD formed by EFP.